Again trouble with the breakdown pilot: US supervision orders 737-Max repair


Again trouble with the breakdown plane
US oversight orders 737-Max repair

Again problems with the crisis jet: The US aviation authority intervenes again if there are problems with the Boeing 737 Max. The electrical problem turns out to be more serious than expected. However, the elimination of defects should not cause a great deal of effort.

The US aviation authority FAA has ordered repairs to a number of Boeing 737 Max aircraft that are currently unable to take off due to an electrical problem. The agency published specific instructions on how to remedy the deficiencies in Washington on Wednesday (local time). According to the FAA, 106 machines are affected, 71 of which are approved in the USA. The repairs should require a maximum of 24 hours of work per aircraft, the supervisor estimated.

Boeing warned customers about a potential defect around three weeks ago and advised them to suspend operations until possible defects in the power supply system could be ruled out. US airlines then withdrew dozens of machines from service. This step was voluntary, the FAA did not have a start ban. Boeing later admitted that the problem was wider than expected, affecting components in several areas of the cockpit.

The now published FAA directive to ensure the airworthiness of the 737 Max seems to confirm the assumption already made by Boeing that the rectification of defects does not cause excessive effort. The supervisory authority puts the cost of repairing the 71 aircraft registered in the USA at around 155,000 dollars. Boeing CEO Dave Calhoun had previously stated that no more than a few days of work per machine should be necessary.

In addition to the jets in flight operations, hundreds of 737 Maxs, which Boeing has built since 2019 and have not yet handed over to customers, also have to be repaired. After two crashes, with a total of 346 deaths, the model series was banned from flying for around 20 months and was only approved again in the USA in November. The reason for the accidents was considered to be defective control software. The current problems are not related to it, assures Boeing.

.