Fritzbox 7590 AX, 7590 & 7530: New laboratory brings exciting improvements







AVM has provided new laboratory versions with exciting improvements for three Fritzbox models.

Enlarge

Fritzbox 7590 AX, 7590 & 7530: New laboratory brings exciting improvements

© Cinemaberg

For the


Fritz box 7590 AX

(Lab 07.39-96347),


7590

(laboratory 07.39-96346) and


7530

(Laboratory 07.39-96345) new laboratory versions of Fritz OS 7.39 are available for installation.

You can download the laboratory version suitable for your Fritzbox here. There you will also find instructions for the installation. AVM is also particularly pleased to receive your feedback, which you can give using this online form.

Fritzbox routers in comparison: which is the best model?

You can read the complete changelog for the new laboratory version on this page.
The laboratory versions 7.39-96346/96347/96345 specifically bring these innovations and improvements:

  • Internet:

    Improvement – no publication of the IPv4 address to Myritznet on dual-stack connections with carrier-grade NAT; The Myfritz address is always resolved to the IPv6 address

  • WIRELESS INTERNET ACCESS:

    Improvement – new message under “System / Events” when a new session key was negotiated (connections according to WPA3/SAE standard)

  • home network:

    Improvement – Detail pages of network devices have been revised

Improvements in Fritz OS 7.39-96346/96347/96345 within the Fritzlabor:

Internet:

WIRELESS INTERNET ACCESS:

  • Fixed – It is again possible to set the WLAN transmission power for the public WLAN guest access

  • Fixed – “WLAN / Radio Channel” page was not fully displayed with Safari on macOS/iOS/iPadOS

DECT/FRITZ!Fon:

home network:

smart home:

  • Improvement – Google calendar setting can be updated via a button

  • Improvement – Routines can be activated and deactivated via templates

System:

  • Fixed – Erroneously sent change note for additional confirmation option has been removed

  • Improvement – when calling up the link to the laboratory feedback, the Fritz OS version is also transmitted

Important NOTE:

Laboratory versions of Fritz OS are only intended for experimental Fritzbox owners who know what they are doing. Laboratory versions should not be installed on Fritz boxes that are intended for productive use, for example in the home office. AVM gives neither support nor guarantee for laboratory versions. If you want to be on the safe side with your Fritzbox, then you should only install the final Fritz OS versions on it. This shows you the Fritzbox for installation as soon as an update is available.

Fritz OS 7.50: VPN finally easy with Wireguard

Fritz OS 7.50: The Fritzfon learns to speak





Source link -63