In-article:

Razer introduces its DeathAdder V3 Pro mouse and HyperPolling Wireless dongle

The DeathAdder is an essential model in the catalog of Razerthe manufacturer has already upgraded its mouse for gamers many times and this week it has just presented the DeathAdder V3 Pro, a wireless and ultra-light modelequipped with the latest technologies of Razer.

Without further ado, here is the presentation of the DeathAdder V3 Pro by Razer :

  • An iconic design, with even more refined lines

Since its launch in 2006, over 15 million DeathAdders have been shipped worldwide. Considered the quintessential Razer gaming mouse, the DeathAdder has earned the trust of professional gamers around the world. With the DeathAdder V3 Pro, victory takes on a new form. The refined lines on each side as well as on the buttons more naturally fit the shape of the fingers in order to provide more grip and better support. Ergonomics have been improved for more comfort, better sensations and a light grip. In addition, the wheel, buttons and palm support have been raised for increased accessibility. Thanks to feedback from the best professional players in the e-sports scene, the ergonomics have been further refined. This new design of the iconic and minimalist mouse is now available in black and white versions, with a featherweight of 63 and 64 grams respectively.

If it retains its reliability and is still just as pleasant to use, the DeathAdder V3 Pro is nevertheless 25% lighter than its previous version and incorporates a battery offering an autonomy of up to 90 hours. In addition, it is easily rechargeable via a USB Type-C port and its included Razer Speedflex charging cable.

  • Cutting-edge technologies, focused on pure performance

At the heart of the DeathAdder V3 Pro is the Focus Pro 30K optical sensor, which achieves 99.8% accuracy. This powerful new sensor is equipped with a suite of features based on artificial intelligence, such as Smart Tracking, Motion Sync and Asymmetric Cut-off, for optimal high-level performance. The DeathAdder V3 also features Gen-3 optical switches for zero double-click and bounce issues. Ultra-fast and reliable, these new switches are designed for a life cycle of up to 90 million clicks.

DeathAdder V3 Pro is equipped with Razer’s exclusive HyperSpeed ​​Wireless technology, which is 25% faster than any other wireless technology, and is also compatible with Razer’s new HyperPolling Wireless technology. The DeathAdder V3 Pro has a polling rate of 1,000 Hz, at 1 ms intervals. With the addition of the Razer HyperPolling Wireless dongle, DeathAdder V3 Pro communicates wirelessly at 0.25ms intervals, so there’s 4x more polling than before, which translates to 4x faster compared to polling rates. standard report. By combining these two advanced technologies, gamers will experience smoother tracking, smoother framerate refresh, and ultra-low click latency for a wireless mouse. Ideal for gamers who want to outplay their opponents in competitive games, where every millisecond counts.

The Razer DeathAdder V3 Pro incorporates the latest technologies from Razer, dedicated to gaming and mice, combining esports ergonomics with a high-end sensor, Gen-3 Optical Switches with wireless technologies from tip, all with an airy design. A new chapter of the legend is about to begin:

  • Improved, ultra-lightweight ergonomics, made for long gaming sessions;
  • Focus Pro 30K optical sensor;
  • Wide Surface Compatibility – Sensor tracks clear glass at least 2mm thick;
  • Gen-3 optical switches with a lifespan of 90 million clicks;
  • Improved polling rate up to 4000 Hz thanks to the HyperPolling Wireless Dongle, sold separately;
  • Five independently programmable buttons and an additional DPI button;
  • Autonomy of 90 hours;
  • Type-C cable and a Razer Speedflex charging cable for smoother movements;
  • Weight: 63 grams for the black model and 64 grams for the white model (excluding cable);
  • Approximate dimensions: 68 mm / 2.67 in (width) x 44 mm / 1.73 in (height) x 128 mm / 5.00 in (length).

Razer DeathAdder V3 Pro Black2 Razer HyperPolling Wireless Dongle

In addition to this, the manufacturer reveals the HyperPolling Wireless Donglewhich allows wireless mice to achieve a polling rate 4000Hz, a technology aimed primarily at high-level competitive gamers that avoids obstruction of wireless signals while automatically adjusting report rates. A dongle for the moment only compatible with DeathAdder V3 Pro and Viper V2 Pro from Razerbut other models will follow in the future.

the HyperPolling Wireless Dongle is available now on the official store of Razerversus €34.99. The DeathAdder V3 Pro mouse is sold €159.99and one bundle with both products is offered for €177.50. Finally, the DeathAdder V3 Pro has already passed through our hands, you can find our complete test right here: DeathAdder V3 Pro TEST: when a feather becomes a gaming mouse!

thumbnail editorClint008
Writer – Tester

source site-121