The technology makes the difference. That’s why Bluetti battery packs are better

Winter is approaching and some are wondering whether the energy supply is actually guaranteed. Because even if the heating works with another energy source, the system needs electricity, for example to operate the pumps that send the heated water through the pipes.

The well-known manufacturer Bluetti has many products and combinations in its portfolio that are perfectly tailored to your individual situation: If you own a PV system, for example, you can significantly increase your self-consumption rate with solar generators from Bluetti and thus save a significant amount of money. You can also implement emergency power operation with these devices if necessary. But even if you rent an apartment, a Bluetti generator can run a refrigerator, laptop or even a washing machine in the event of a power failure – so that the effects of a temporary blackout are hardly noticeable for you personally.

High comfort and more safety through innovative technology

The Bluetti generators and battery packs are robust and technically mature. Many protective circuits that switch off early protect you and the device reliably from damage. Regular firmware updates ensure that you always have the best version of your solar generator at the start. In addition, a status check via the app is possible at any time.

In terms of storage technology, Bluetti relies on the latest generation of LiFePo4 batteries. This type of battery has many advantages over conventional lithium batteries: LiFePo4 batteries have a very long service life. As a rule, they last up to 5000 charge/discharge cycles and then still have at least 80 percent of their original capacity. They are comparatively light and are well suited to being charged and discharged quickly. This is an important point, especially when connecting large consumers.

In conjunction with Bluetti’s sophisticated battery management, the LiFePo4 batteries in Bluetti generators and battery packs are among the safest on the entire battery market.

Another plus point is the large temperature range in which LiFePo4 batteries work: They are always available at full capacity in sub-zero temperatures and in the summer heat.

Below we present two individually expandable combinations of power station and expansion battery, which are ideal for the emergency supply of a small house or apartment – but also cut a fine figure for outdoor activities.

BLUETTI AC200MAX+B230 Home Battery Backup

• Capacity: 2,048Wh for AC200MAX. LFP battery with a life cycle of 3,500+ to 80%.
• Expandable with up to 2 battery modules.
• Up to 6,144 Wh with 2 × B230 or 8,192 Wh with 2 × B300.
• 2,200W pure sine wave AC inverter, peak power 4,800W.
• Up to 900W solar input rate and 400W adapter input, 1,400W total.
• Intelligent app control and monitoring.

The charging options of the AC200MAX are as diverse as the possible application scenarios: The AC200MAX enables up to 900 W solar input and 400 W via the socket adapter, you can even charge it via your socket and solar panels at the same time. This gives you a total charging rate of 1,400W, which can charge your power station in less than two hours! In addition, each Bluetti battery module has its own input connector for AC adapters. With each module added, you get an additional 400 W of input charging power.

BLUETTI AC300 + B300 Home Battery Backup

• 100% modular, accepts up to four B300 battery packs.
• 2,400W unmatched solar input.
• 3,000W pure sine wave inverter.
• 5,400W breathtaking input rate.
• 24/7 UPS home backup and 4-year worry-free warranty.

Waiting to charge is never a pleasure. With both the mains socket and any solar panels connected, the AC300 can support a staggering total input rate of up to 5,400W*. Plug in the system before you pack for camping and your power will be ready when you are.

*5400W input power combines 2400W solar and 3000W AC, requiring a minimum of two B300 packs. With only one B300 battery pack, the input power would be limited to 3,000 W.

Innovations from Bluetti

Bluetti is present in over 70 countries and is trusted by millions of customers around the world. The Shenzhen company presented the new EP600 energy storage system at this year’s IFA. Apart from 6,000W power, 6,000W input and 79kWh maximum capacity, the EP600 is a modular ESS (Energy Storage System) that also features an intelligent Battery Management System (BMS), a reliable Lithium Iron Phosphate (LFP) battery pack and an intuitive APP . Fast charge capability from grid and solar power ensures you always get optimal performance no matter the cold or heat. Whether you’re trying to stave off high utility bills, balancing the occasional fluctuating power supply, or preparing for clean energy solutions, the Bluetti EP600 ESS is always ready to support you.

The most important things at a glance

• 24/7 UPS: Adjustable power plan, peak load shifting, <10 ms switchover time
• APP remote control: Wifi/Bluetooth/USB connectivity, over-the-air update
• No emissions: reliable BMS, premium LFP battery, passive/active cooling
• Easy setup (indoor/outdoor): Household AC wiring all-in-one energy storage system
• 79kWh battery modules: 6000W solar and grid charging, 6000W pure sine wave inverter

The system is scheduled to hit the German market later this year. Visit regularly Bluetti website.

About Bluetti

Shenzhen Poweroak Technology Co.Ltd. (“PowerOak”) was founded in 2013. As a pioneer in energy storage technology, the company is dedicated to customer-centric PV energy storage solutions and products. It has been recognized as National High-Tech Enterprise, National Technologically Advanced “Little Giant” Enterprise and listed on Innovation China List of Top 100 Innovative Companies. The products of the Bluetti brand are sold all over the world and thus also gain a high level of awareness.